| 品牌：美国3M | 是否进口：是 | 原产国/地区：美国 |
| 厂家(产地)：美国3M | 牌号：1610 | 用途级别：浸渍类用途 |
| 品名：PTFE | 产品规格：25kg | 包装规格：桶装 |
| 产品特性：耐化学性 |
Algoflon D 1610 F 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 外观 |
|
| 形式 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| pH值 | > 9.0 | ASTM D4441 | |
| 密度 | 1.510 | g/cm | ASTM D4441 |
| 平均颗粒尺寸 | 250 | nm | 内部方法 |
| 补充信息 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| PTFE 含量 - (混合物上) | 60.0 | wt% | ASTM D4441 |
| 非离子表面活性剂 - (混合物上) | 3.5 | wt% | ASTM D4441 |
| Processing Algoflon D 1610 F can be processed undiluted or diluted using distilled or deionized water. Storage and Handling Algoflon PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use. Safety and Toxicology Before using Algoflon PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods Packaging Algoflon D 1610 F is packaged in either 30 kg drums or 1500 kg IBC&＃39;s. Additional Technical Information For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative. |
新北洋工程塑料（昆山）有限公司 经销批发的PC、POM、PA66、PPO、ASA、AES、PBT、ASA/PC、PEI、PPS销售消费者市场，在消费者当中享有较高的地位，公司与多家零售商和代理商建立了长期稳定的合作关系。新北洋工程塑料（昆山）有限公司经销的PC、POM、PA66、PPO、ASA、AES、PBT、ASA/PC、PEI、PPS品种***、合理。新北洋工程塑料（昆山）有限公司***，重信用、守合同、***产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任。
1、物流运费说明
线上拍吨位起，华东地区包配送；偏远地区，运费本公司承担一半，物流公司可由贵公司寻找（具体到货时间以物流或快递公司送货为主）
2、在线下单
因产品太多，不能每天修改，请线上下单之前，先与客服联系，确认再拍
3、在线支付
因本行业波动变化快，线上交易请当天拍，当天付款
4、退换货政策
到货后，7天确定为材料质量问题，免费包换 （退换数量=未拆包材料数量）
5、发票制度说明
可开增值税发票（也可以不开发票，扣除税点即可）
